Clutch Problem

GoldenMotor.com

GMEOVR

New Member
Apr 16, 2010
5
0
0
Australia
G'day boys, Got a new skyhawk 66cc motor in today and all was going fine until i had to install the clutch, my problem is i cant pull the clutch in, its fitted like all the photos but i cant even move the clutch arm in with my hands, it can swing out clockwise about 90 deg but it wont move past the cover, hope i make sense, cheers for any help. Ben

Ps i cant move my back wheel either.
 
Last edited:

Bikeguy Joe

Godfather of Motorized Bicycles
Jan 8, 2008
11,837
252
63
up north now
You can't really push it in...you need to have the cable connected. Once you do that, you will be able to move the back wheel.
 

Bikeguy Joe

Godfather of Motorized Bicycles
Jan 8, 2008
11,837
252
63
up north now
There is another thread going about this....take the cover off, smack the pin in the center of the sprocket with a hammer, and if that doesn't work, re-assemble it, take the other cover off, and TAP around the outer part of the clutch plate with someone pulling the clutch lever.
 

GMEOVR

New Member
Apr 16, 2010
5
0
0
Australia
I cant pull the clutch in at all, it seems to be because of the clutch arm being jammed by the pin, this is only a guess tho.