Hi everyone, today while working on putting my new motor together I thought I'd go over some of the most popular mods; Sprockets, increasing compression, port match, spark plug upgrades, polishing the head, as well as upgrading hardware. All of these together can be done for well under $50 and I thought for the new people out there some information that goes over benefits and cons of each mod could be helpful with physical examples. Here is the links to the videos themselves. The videos are short and simple to the point. All of them are 2-4 minutes.
Upgrading Sprockets and reducing unsprung mass
https://www.youtube.com/watch?v=srasBnIXEXM
Benefits of Port Matching and how to go about doing it
https://www.youtube.com/watch?v=_RyJqqymh2E
Upgrading Spark plugs and benefits
https://www.youtube.com/watch?v=CtSFd9mDrOk
Increasing compression on your stock head
https://www.youtube.com/watch?v=iDvuxS5T5as
Polishing the stock head
https://www.youtube.com/watch?v=wNBp60v5Q9g
Upgrading hardware
https://www.youtube.com/watch?v=0Hff5DOj4VY
If anybody has some input or I missed something or even if I was wrong please say so in the comments! I will make a good DIY on how to port your jug in the future as well as piston lightening with examples as well as the tools needed to accomplish these things!
Upgrading Sprockets and reducing unsprung mass
https://www.youtube.com/watch?v=srasBnIXEXM
Benefits of Port Matching and how to go about doing it
https://www.youtube.com/watch?v=_RyJqqymh2E
Upgrading Spark plugs and benefits
https://www.youtube.com/watch?v=CtSFd9mDrOk
Increasing compression on your stock head
https://www.youtube.com/watch?v=iDvuxS5T5as
Polishing the stock head
https://www.youtube.com/watch?v=wNBp60v5Q9g
Upgrading hardware
https://www.youtube.com/watch?v=0Hff5DOj4VY
If anybody has some input or I missed something or even if I was wrong please say so in the comments! I will make a good DIY on how to port your jug in the future as well as piston lightening with examples as well as the tools needed to accomplish these things!