Springer forks with v-brake mounts

GoldenMotor.com
MotoMagz

MotoMagz

Well-Known Member
Aug 2, 2010
1,817
1,154
113
Michigan
Are you looking for a 1" threaded or nonthreaded steering tube or 1 1/8" Lots of 1 1/8 on ebay.If you want a 1 inch threaded get a 1" threadless and switch out the steering tube to a threaded.
 
chainmaker

chainmaker

Well-Known Member
Jan 19, 2010
2,634
69
48
Ma USA
Take some pic and post them, You never know someone is always looking to improve their braking.
Cheers
 
darkhawk22

darkhawk22

New Member
Aug 17, 2010
733
8
0
Acworth, GA
I still like the one in the photo the best, it has a slight bend to it and has the bent trusses. The v-brake mounts are a plus as well. If it's built in Germany, where the seller is located, then the quality is probably better than the China/Taiwan ones. I can order it direct but the pricing is in Euros which makes the items more expensive by about 35% at the current exchange rate.
 
darkhawk22

darkhawk22

New Member
Aug 17, 2010
733
8
0
Acworth, GA
Yea the pricing was a bit of an issue so I went with a springer from Justin over at PirateCycles, it works great and was not expensive at all. Instead of the v-brake setup i'll be going with a set of worksman wheels with the drum brake most likely.
 
You must log in or register to reply here.
Top Bottom