think i snaped a rod on my hs need help

GoldenMotor.com

stewpedassle

New Member
Feb 16, 2012
89
1
0
florida
i was trying out new carb and exhaust config ran to lean it froze at first thenfired up quitand lost all compression i can hear rod wagging before i take it apart is there a sealant needed to put it together like gasket rvt what kind of headaches are in store if i take to small engine shopwhat kinda price you think theyle charge :-||:-||
 

racie35

Active Member
Nov 17, 2012
1,702
5
38
usa
you may be better off buying another engine......having that fixed may surprise you at the register
 

glennbo

Member
Aug 24, 2010
347
13
18
HAMMOND
rod 20
piston/rings 20
gaskets 10
cylinder 15
shipping 10
new engine 80
i would get a new engine but thats just me
 

GearNut

Active Member
Aug 19, 2009
5,104
11
38
San Diego, Kaliforgnia
rod 20
piston/rings 20
gaskets 10
cylinder 15
shipping 10
new engine 80
i would get a new engine but thats just me
This is a HuaSheng F142 49cc 4-stroke engine, not a ChinaGirl 2 stroke.

stewpedassle, This is not a Super Titan, but it is cheaper priced:
http://www.gasbike.net/4-stroke-engine-only-2865-prd1.html

If you want to try to replace the rod on your blown engine, to seal up the crankcase seam use Yamabond #4 or Hondabond, or Three Bond 1105 sealant. They are all the same stuff. Hylomar will work fine too.
 

ocho ninja

Member
Jan 14, 2012
564
2
16
San Jose, CA
It's in big blues post.

That's a brargain son!

It's just a bare engine, no pull starter flywheel, magneto, etc... But you can get those parts of ur toasted engine
 

stewpedassle

New Member
Feb 16, 2012
89
1
0
florida
the one at gasbike outostock til poss end of year and other has too long of shaft need tapered shaft like super titan for my tranny looks like im eating bologna sandwich's for mnth or so til i can afford lol ARRRRRRRRRRRRRRGGGGGGHHHHH!!!
 

GearNut

Active Member
Aug 19, 2009
5,104
11
38
San Diego, Kaliforgnia
You need to take a closer look at that ebay engine.
It has the same shaft and clutch dimensions as the super titan.
The shaft looks longer on one of the photos because the clutch shroud has been removed.
The other photo shows the engine with the shroud and clutch installed.

It is the same beast.
Look for your self.
I did it with both ebay and DAX opened on different browser tabs and I toggled between the two looking closely at the photos.
 

BigBlue

Member
Nov 29, 2011
781
0
16
California
You need to take a closer look at that ebay engine.
It has the same shaft and clutch dimensions as the super titan.
The shaft looks longer on one of the photos because the clutch shroud has been removed.
The other photo shows the engine with the shroud and clutch installed.

It is the same beast.
Look for your self.
I did it with both ebay and DAX opened on different browser tabs and I toggled between the two looking closely at the photos.
Looks the same to me.

Chris
AKA: BigBlue