Re: New Intake/Stuck throttle
A few thoughts ...Your carb is probably at the wrong angle causing float to stick and is flooding a bit, the angle on these extended intakes is also all wrong. Also the carb slide may have gotten misaligned on idle screw from messing with the carb and is sticking. Or lastly you have an air leak. These extended intakes are welded up really bad, I've found as many as 3 pin holes per intake from bad welds per intake. Seems they are all welded by a 5 year old. At any rate something changed. With float, cable, leaks, flooding, gasket, idle screw adjustment...or all of the above. Yep, Picts always help
"One pull and It's on, one snip and its off"
“Lets not get too technical”