wiring lights with 7wire turn signal switch

GoldenMotor.com

boxcar

New Member
Dec 18, 2014
358
4
0
Astoria OR
I run a unit comparable to the one you picture.



The provided wiring diagram on mine was wrong.
I ended up just testing the wiring with a simple power supply and test light.
I know that I drew up a diagram for mine , I will find it and post it up later.
I run a 2 pole turn signal relay / an alarm screamer for the horn ( draws very few amps) etc....
 

TakeiT

Member
Apr 17, 2014
128
1
16
Oshawa, Ontario
Green wire goes to turn signal relay, white wire goes to left turn, blue goes to right.

If I remember correctly, the black and brown ones go to the horn and the other two are the headlight. A multimeter will verify it.
 

boxcar

New Member
Dec 18, 2014
358
4
0
Astoria OR
The diagram sent to me from the seller is:
Red&Black : Lights
Brown&Yellow: Horn
Green: Left Turn Signal
Blue: Right Turn Signal
White: Ground for Turn Signal Lights

This was wrong on my switch as the wires on mine were different colors, but it may be the correct diagram for the switch you have.

The diagram for your switch seems to be a bit different.....

http://ebaypa.com/albums/201400014/sku160588.jpg

You may have to test each wire.
 
Last edited: