If you have a vice, lock the block in it,put a chain wrench on the fly wheel and use a 36inch pipe as a lever.It will move .H.D.
stuck motor old briggs
- Thread starter motor_head
- Start date
i have cleaned almost all the rust out of the bore and the crank is out. i'm going to heat it up might be awhile thought alot of snow is on the ground already and more is coming down as i type and ontop of that tomorrow it's supposed to start blowing
Sounds like you have everything under control; except the weather that is.
I hope she cooperates with you, the engine and mother nature.
I hope she cooperates with you, the engine and mother nature.
haha it's free!!!!!!!!!!!!
heated it up and got the piston out, i ended up heating it up then let it cool
several times because the piston was getting kind soft so i didn't want to break it
i put a small ding it it but it's not very bad so all in all not to bad
heated it up and got the piston out, i ended up heating it up then let it cool
several times because the piston was getting kind soft so i didn't want to break it
i put a small ding it it but it's not very bad so all in all not to bad
Congratulations!!!
I was beginning to wonder how that was going for you. I am glad to hear that you got it free. How does the bore look? Is it saveable without oversizing it?
I was beginning to wonder how that was going for you. I am glad to hear that you got it free. How does the bore look? Is it saveable without oversizing it?
