Starting procedure

GoldenMotor.com

velardejose

New Member
Sep 9, 2008
120
0
0
Lima, Peru
Hi
After learning how to do it the hard way, it could be a good idea to make a step by step guide to start our china engines
1. Open the fuel valve
2. Close the choke
3. Push the tickler a few secs
4. Pulling the clutch lever pedal to get some speed
5. Release the clutch lever and give it some gas
6. After some secs open the choke halfway
7. After a min or so open the choke completely
8. Smile from ear to ear
Remember not to rev the engine when cold, because two stroke pistons are conical shaped and need to warm up to get cilyndrical and work properly
Hope it helps
Jose