I'm finishing up my first build and as usual confused buy the chinese-english translations. My instructions tell me to hook up the white wire coming off the engine to the yellow wire on the kill switch but make no mention of the green wire coming from the kill switch. My best guess is that it's a ground and needs to be connected to the engine, but someone put a plastic sleve over it, which got me wondering if I should just not attach it. Would appreciate any help you can come up with. Worst case I will go with my gut and if it blows tha magneto then I have another project.
2Door has the way I do it to wire up the engine. you can get by with just one wire to the engines blue cdi wire and one to a ground(frame or engine or the black wire). The black wire from the engine to the cdi is a ground. Some kill switches only have one wire. 2 wire kill switches either wire from the kill switch to the blue on the cdi and one to a frame ground will work. I leave the white wire for a light. if your not using a light cap off the wire. Best bet is use the diagram the 2Door has.
Norman
2Door has the way I do it to wire up the engine. you can get by with just one wire to the engines blue cdi wire and one to a ground(frame or engine or the black wire). The black wire from the engine to the cdi is a ground. Some kill switches only have one wire. 2 wire kill switches either wire from the kill switch to the blue on the cdi and one to a frame ground will work. I leave the white wire for a light. if your not using a light cap off the wire. Best bet is use the diagram the 2Door has.
Norman
Last edited by a moderator: