need help clutch

GoldenMotor.com

hypernet

New Member
Sep 16, 2012
4
0
0
australia
hi im new here just got bike just have a prob with the clutch i can spin move the drive shaft even when the clutch is in engaged have ive broken something?
 

hypernet

New Member
Sep 16, 2012
4
0
0
australia
Re: need help

hi dont think i expland my problem proply so heres wats happing clutch wont engage stays in the free wheel mode can anyone help?

New to motorize bikes
 

DaveC

Member
Jul 14, 2010
969
1
18
Boise, ID
Re: need help

Hi there :) I'll try to diagnose long distance, see what happens. Make sure the clutch cable is not pulling too much then pull the clutch cover off. Right below it there's a *star* nut. It's held in place with a small screw. Remove the screw and turn the star clockwise(to the right) 2 notches. Two notchs and not 2 turns. See if that helps. Put the screw back in. You might have to do more than that but it's a start. When you put the cover back on make sure you get the bolts tight, they like to loosen up from the vibration.

Like I said, it's a start.auflg