I hope its just me, or a stroke of bad luck.
I have been trying to get some Motor Mounts from MM and it seems like I run into dead end after dead end. Even was told by a supplier that they are no longer making parts. Thats where I left it lay until recently when I decided to try again since a couple months have passed.
I figured before I begin to attempt my own Motor Mounts, I would see if MM mounts were available from anywhere at all since its been a couple of months. Well needless to say, I am just about ready to give up and get together with a friend and his Mill. All parts of any kind anywhere of MM are out of stock with no restocking in sight.
So I did in fact call MM and out of 6 tries I got through to someone on the 6th try. This is over a period of many months mind you. I was told that Jim was busy in the shop and that they were running them as we speak and should be out to a supplier by the end of the week. May not have been Jim himself but was happy someone answered this time and talked to me
I was excited to say the least. So what do I do next? I call the supplier so I can be put on a waiting list, or anything that would insure me a pair when they got there. I was then told that since MM had the fire, they have not got anything in from them. They have been told many times that they were up and running and to expect shipments by the end of the week. The same thing that was told to me, so dont hold my breath basically.
I just was wondering if anyone else here has had any luck with MM lately. I read all the rave reviews on here and I dont doubt they make a quality product, a product I would rather have than attempting to make my own. However if they are out of business then its time to get busy with the Mill and wish for the best.
Sorry for the long winded post
I have been trying to get some Motor Mounts from MM and it seems like I run into dead end after dead end. Even was told by a supplier that they are no longer making parts. Thats where I left it lay until recently when I decided to try again since a couple months have passed.
I figured before I begin to attempt my own Motor Mounts, I would see if MM mounts were available from anywhere at all since its been a couple of months. Well needless to say, I am just about ready to give up and get together with a friend and his Mill. All parts of any kind anywhere of MM are out of stock with no restocking in sight.
So I did in fact call MM and out of 6 tries I got through to someone on the 6th try. This is over a period of many months mind you. I was told that Jim was busy in the shop and that they were running them as we speak and should be out to a supplier by the end of the week. May not have been Jim himself but was happy someone answered this time and talked to me
I was excited to say the least. So what do I do next? I call the supplier so I can be put on a waiting list, or anything that would insure me a pair when they got there. I was then told that since MM had the fire, they have not got anything in from them. They have been told many times that they were up and running and to expect shipments by the end of the week. The same thing that was told to me, so dont hold my breath basically.
I just was wondering if anyone else here has had any luck with MM lately. I read all the rave reviews on here and I dont doubt they make a quality product, a product I would rather have than attempting to make my own. However if they are out of business then its time to get busy with the Mill and wish for the best.
Sorry for the long winded post
