48cc skyhawk carb adj.
- Thread starter stashua1956
- Start date
Stash,
The screw on the carb is a idle speed adjustment, if you have the stock carb. This needs to be adjusted when the motor is warmed up, out(CCW) lowers the idle, in(CW) raises it. If it doesn't lower, ensure your cable is not holding the carb barrel up, you should have a bit of "slack" in the throttle cable.
Mac
The screw on the carb is a idle speed adjustment, if you have the stock carb. This needs to be adjusted when the motor is warmed up, out(CCW) lowers the idle, in(CW) raises it. If it doesn't lower, ensure your cable is not holding the carb barrel up, you should have a bit of "slack" in the throttle cable.
Mac
