Well I was riding and all of a sudden my engine is revving but I'm not going anywhere. I killed the engine and tried turning it back on and it wont start. My clutch arm works and nothing wrong with the cable. So I opened the sprocket assembly and saw that the little dowel pin that holds the sprocket to the clutch axial has been crushed and split into two. Now I don't what to do or where to find this little dowel pin. So if anyone wants to help me out I'll be more thankful.
10 Tooth Sprocket Spins Freely
- Thread starter Andrey
- Start date
clutch pin and bearing $4.99
ENGINE_KIT_PARTS_PAGE_3
I never heard of one being crushed or split in two before, most people just lose them.
ENGINE_KIT_PARTS_PAGE_3
I never heard of one being crushed or split in two before, most people just lose them.
Yes...it sounds like the key has sheared, or was missing from new...yes it happens!!!
Remove the sprocket nut and the sprocket...there should be a woodruff, (half moon), key in the shaft. If not, you will need either a 1/8" or 3/32" key. Be prepared to file it to fit.
Hardware stores usually stock these.
Jim
Last edited:
Motorized Bicycles Gas Bike Engines Gas Powered Bikes Motorized Bicycle Parts
copy and paste the above in new search page
bicycle engine parts ,page 5 ,second one down on the right
copy and paste the above in new search page
bicycle engine parts ,page 5 ,second one down on the right
