Spark Problem

etb · May 23, 2009

Hey I just purchased a motor (jet 80cc) and I'm having a problem getting any spark. I put a 12 volt test light on the blue wire coming from the magneto and cranked the engine over fast and got no current out of the magneto. What is the output voltage from the magneto. I can then test it with a volt meter that way I know if the magneto is faulty or not.
Thanks

Dave31 · May 23, 2009

CDI pack GOOD Mine
Black to Blue 1150kΩ 7.6 meg Ω
Black to Plug 2.6kΩ 2.17K Ω
Blue to Plug 1150kΩ OPEN

Magneto
Blue to White 327Ω 349Ω
Black to Blue 327Ω 347Ω
Black to White 2.1Ω 2.1Ω
Black to Gnd 0Ω 0.3Ω
Blue to Gnd 327Ω 347Ω
White to Gnd 2.1Ω 2.3Ω

bravofire84 · May 23, 2009

u know when i got my first motor the cdi module was'nt even hook up but with soldering and electrical tape it all work out. May not be the problem but some assistance to help u with your dance1

slight problem.

Search

Spark Problem

etb

New Member

Dave31

Active Member

bravofire84

New Member