Check out this hs 53cc

ocho ninja · Nov 23, 2012

Saw it on eBay
Thought it was interesting because of it's bigger displacement and It has an generator that put outs electricity

http://www.ebay.com/itm/53CC-GAS-4-...704?pt=LH_DefaultDomain_0&hash=item4abecaa9e0

moonerdizzle · Nov 23, 2012

to bad its not a straight shaft. the bigger displacement is for powering the genny. i want one, but it would have to have a straight shaft

JonnyR · Nov 23, 2012

if you use it wit the 4G for a tapered shaft it would work just fine

moonerdizzle · Nov 23, 2012

im not going to piece together a whole new kit just to have lights, i got an idea to run a 6v armature off the motor i got. just have to get my bike back from paint.

moonerdizzle · Nov 23, 2012

and isnt the taper shaft trannys getting harder to find?

JonnyR · Nov 23, 2012

if you want to use the motor you will find it it would just take some calling around to get

JonnyR · Nov 23, 2012

looking around i think calling terry at blowbyU would be your best shot and he sells that version of the HS with the generator in it so he should have the trans for it

ocho ninja · Nov 23, 2012

My hs is a tampered shaft.

It's a Titan from thatsdax... It took me a while posting on the forum to find a 4g tranny for it

I was thinking this motor or a 79cc predator for my next motor.

But I've been wanting lights powered of the motor for a while and this sparked a few ideas.

The_Aleman · Nov 24, 2012

The HS 53 is considerably wider than the regular 49 non-genny versions. It's an extra 1.5" or more on the starter side to accommodate it's genny.

With a tapered shaft 4G mounted, the whole assembly would be every bit as wide as a HF/Pred motor with AGK gearbox!

Search

Check out this hs 53cc

ocho ninja

Member

moonerdizzle

New Member

JonnyR

New Member

moonerdizzle

New Member

moonerdizzle

New Member

JonnyR

New Member

JonnyR

New Member

ocho ninja

Member

The_Aleman

Active Member