Hey everyone, I could really use some help. I have a new DAX 2-stroke that has decided to quit on me. I ran it for almost 2 full tanks, had some issues getting it to idle properly and finally got that straightened out. Rode it to work about a week and a 1/2 ago and because it was idling correctly I had to use the kill switch to turn it off. This was about a 4.5 mile ride. Went to start it that afternoon and it wouldn't fire.
I have swapped plugs and plug wires, new magnet and new CDI. I also have disconnected the kill switch. I am definitely getting spark. I spoke with Duane and he recommended I put a little of my pre-mix in the spark plug hole, replace the spark plug and see if it will fire up for a second. This did not work. I am at a complete loss of what to do next. Thanks in advance.
Kelly
I have swapped plugs and plug wires, new magnet and new CDI. I also have disconnected the kill switch. I am definitely getting spark. I spoke with Duane and he recommended I put a little of my pre-mix in the spark plug hole, replace the spark plug and see if it will fire up for a second. This did not work. I am at a complete loss of what to do next. Thanks in advance.
Kelly