i am looking for a crank seal for a right now very un happy time 80 cc BGF.
if anyone has one let me know.
thanks all
Kevin
if anyone has one let me know.
thanks all
Kevin
crank seal
- Thread starter kcmcf
- Start date
I wonder if any crank seal from any "80cc ish" engine wouldn't do. I know it is said they are made all over china but i wonder if the seals will interchange.
If you have your old one and an auto parts store that will work for their sale, you might be able to match it up with something there. If not you might try a lawnmower shop but the one here is only a computer match type place. If you don't want it to replace what they have in their computer forget it.
Good luck.
If you have your old one and an auto parts store that will work for their sale, you might be able to match it up with something there. If not you might try a lawnmower shop but the one here is only a computer match type place. If you don't want it to replace what they have in their computer forget it.
Good luck.
I do not have any crank seals. Never had the need to stock them. What about the Boygofast warranty? What is with the warranty?
I did when I put my kit in as well. Of course I had no replacement issues just trying to get advice. I did buy a couple of rings from him because I screwed them up not his fault.
Order the seal and a new bearing from boca bearings
search page measure the bearing
boca bearings
Boca Bearings - Miniature Bearings for Hobby&Industry
comparison chart
Boca Bearings - Miniature Bearings for Hobby&Industry
search page measure the bearing
boca bearings
Boca Bearings - Miniature Bearings for Hobby&Industry
comparison chart
Boca Bearings - Miniature Bearings for Hobby&Industry
mine blew out the side, all i did was take the gears off, took a srewdriver and went around pring it out. the new one i found a socket that was close in size put the seal in then seated it with the socket and a hammer.
