So far I've noticed that the lower mounts are pretty much the same on the DeNardis engines but they lack the head mount... this shouldn't be a problem for a new build but could present problems if putting onenof these in an existing build where the top mount was used. The front and rear mounts can easily be fabricated out of aluminum or steel sheet stock but if you have an older frame that uses all 4 mounting points it may require the builder to fab up a mount that could be bolted to the head by using longer head studs.i am looking into a water cooled denardis 60cc big bore motor and was wondering if it would fit into the skyhawk frame nicely.
the denardis water cooled motors... do they have the same mounting patern as the morini air cooled ? and what type of mouning hardware did you fabricate to get it in th frame it would be a big help if you could put up some pics of the mounts . .. i was also wondering if you made use of the china girl frnt mount that comes on the frame ?