MitchP New Member Oct 6, 2012 276 0 0 Santa Rosa, CA Oct 22, 2012 #1 I measured the inside of my head tube it's 5 1/4 end to end. Will this fork fit? http://www.chubbyscruisers.com/shop/nirve-springer-brake-pivots
I measured the inside of my head tube it's 5 1/4 end to end. Will this fork fit? http://www.chubbyscruisers.com/shop/nirve-springer-brake-pivots
J JonnyR New Member May 13, 2012 1,203 1 0 37 ronkonkoma, new york Oct 22, 2012 #2 only ones that will tell you 100% are the sellers i would call and ask
wheelbender6 Well-Known Member Sep 4, 2008 4,059 221 63 TX Oct 22, 2012 #3 You need to consider the head tube diameter too. Determine if your frame takes a 1" or 1 1/8" steering tube.
You need to consider the head tube diameter too. Determine if your frame takes a 1" or 1 1/8" steering tube.
MitchP New Member Oct 6, 2012 276 0 0 Santa Rosa, CA Oct 22, 2012 #4 I just ordered a chopper fork. I can adjust it every which way.
T TGM2054 New Member Mar 22, 2012 11 0 0 Iowa Oct 24, 2012 #5 Don't make the same mistake I did. I got a Nirve chopper fork for my bike. Turns out the forks fit 1 1/8" head tube, my bike has a 1" head tube. Check the inside diameter of the steerer tube first. I got a really neat set of forks though!
Don't make the same mistake I did. I got a Nirve chopper fork for my bike. Turns out the forks fit 1 1/8" head tube, my bike has a 1" head tube. Check the inside diameter of the steerer tube first. I got a really neat set of forks though!