had a tensioner problem .. fixed it by cutting out the chainstays and widening them with some handlebar cutoffs . no more dangerous tensioner . Sprockets are wearing in a lot ( no way a chain can stretch that much ) .. shimmed in the rear mount after to get rid of the slack . Motor is running good . Did the sound dampening treatment before i started putting it together ( sounds ok )
Soldered the wires ( now the killswitch works )
So far so good .
this is the bike now
Still need to shorten up the throttle cable
Soldered the wires ( now the killswitch works )
So far so good .
this is the bike now
Still need to shorten up the throttle cable