I purchased a new bike, schwinn link and have installed the grubee skyhawk 66 on it. after reading countless threads here can't exactly find answers to the problems i am having.
first i tried dumping that garbage the chinese calls a chain and went and purchased a #41 chain from murddocks. Much more robust but had problems with it hitting the case of the engine, when i reinstalled the clutch lever/cover back on it. Then i also noticed the chain was too big for the idler pulley . any suggestion are appreciated.
Also the carburetor is a tight squeeze, mounting the air filter rests against the seat post so i am wondering if shortening the intake if it would be an option.
thanks, waiting to take my first ride.
JACK
first i tried dumping that garbage the chinese calls a chain and went and purchased a #41 chain from murddocks. Much more robust but had problems with it hitting the case of the engine, when i reinstalled the clutch lever/cover back on it. Then i also noticed the chain was too big for the idler pulley . any suggestion are appreciated.
Also the carburetor is a tight squeeze, mounting the air filter rests against the seat post so i am wondering if shortening the intake if it would be an option.
thanks, waiting to take my first ride.
JACK