Grubee GT2 48cc
SBP Ex. Chamber
Dax RT Carb
Boost
NGK Sparkplug
32:1
800 ft. elev.
Ok, that's the bike.
Here's the problem:
Lost power/spark.
Changed:
Brand new CDI, cut white wire completely, and all solders/grounds look good.
Not wet. Scuffed back-side of Magneto Frame/Ground.
Upgraded wire from CDI to Plug, wire correctly.
NGK Plug brand new.
Brand new magneto installed, and woodruff pin in place on magnet.
Seals good, no air leaks anywhere.
Checked on the gear side, pulled gear, gear in tact, no seal leak. Re-installed, nice n tight.
Wired correctly. No KILL switch attached, blue wire only!
ZERO spark!
HELP!
WTF?
Thanks.
PS: Bike ran great for about 350 miles prior to this.
Chris B.
SBP Ex. Chamber
Dax RT Carb
Boost
NGK Sparkplug
32:1
800 ft. elev.
Ok, that's the bike.
Here's the problem:
Lost power/spark.
Changed:
Brand new CDI, cut white wire completely, and all solders/grounds look good.
Not wet. Scuffed back-side of Magneto Frame/Ground.
Upgraded wire from CDI to Plug, wire correctly.
NGK Plug brand new.
Brand new magneto installed, and woodruff pin in place on magnet.
Seals good, no air leaks anywhere.
Checked on the gear side, pulled gear, gear in tact, no seal leak. Re-installed, nice n tight.
Wired correctly. No KILL switch attached, blue wire only!
ZERO spark!
HELP!
WTF?
Thanks.
PS: Bike ran great for about 350 miles prior to this.
Chris B.