Re: Engine on order, Hooray!
after my fender broke it didnt come all the way off but it was real loose.
i took it off and saw that the thin fender mount tab broke off.
the tab is held on to the fender by 2 ribbetts, the tab bolts to the bike threw a hole.
i took off fender and drilled out the ribbets and the tab is off,
next i found a small steel "L" shaped braket and bolted it in place of the tab on the fender.
washers may be need if drilled holes are bigger than bolt.
and i bolted that to the bike the same as the stock tab. i also added a thin piece of rubber between fender and bike to stop vibration.