View Single Post
Old 06-22-2009, 10:53 AM
reg454's Avatar
reg454 reg454 is offline
Motorized Bicycle Elite Member
Join Date: Jan 2009
Location: michigan
Posts: 269
Default Re: Clutch travels too far in

Originally Posted by Denver Dave View Post
The easiest way to remedy this would be to take the nut off the top of the arm, pull the arm off the shaft, and reposition it outward.
Not necessarily if the arm is that far in than the pin is compressed and you will not get proper movement i say tighten the clutch up 1 turn and see how for out the arm is at. You can all ways undo the tightening if that does not help.
Reply With Quote