View Single Post
Old 05-31-2009, 09:17 PM
Creative Engineering Creative Engineering is offline
Join Date: Sep 2008
Location: Clearwater, FL
Posts: 1,668
Default Re: Chain and sprocket modification

Very Good!!! Yodabob

The engine sprockets are scrap from the Chinese...I had planned on making several hundred of these, but if you are set to do it in volume...

I made the same type of chain tensioner for the Schwinn Jaguar...It worked perfect!

It is not necessary to utilize the 9 bolts when doing a clamshell. Next time try using (3) 3/8" bolts. It will be plenty strong and save on the machining time. I did a 9 pin for the Spoiler belt drive set-up out of necessity.


Manic Mechanic

Last edited by Creative Engineering; 05-31-2009 at 09:26 PM.
Reply With Quote