Re: keyed ignition
The switch is actually for a pocket bike and the little plug would plug into the factory wiring of the pocket bike. I have mine wired in just like the kill switch wiring that I described in post #12 of this thread. I chose the set of contacts that make connection when the key is turned off. So if I turn my key off, the contacts close and ground out the blue wire to the spark plug box. This is just like hitting the kill button. TO start the bike, you must turn the key on, thereby causing the keyswitch contacts to open so that the blue wire is no longer grounded out. Then the bike can be started and will run untill you turn the key back off.
Last edited by marvin martian; 05-16-2009 at 09:45 PM.