View Single Post
Old 04-09-2009, 08:23 PM
Retmachinist's Avatar
Retmachinist Retmachinist is offline
Motorized Bicycle Elite Member
Join Date: Oct 2008
Location: Urbandale Ia
Posts: 637
Default Re: clutch pin question

* The original clutch pin is 8 mm dia. or you can use 5/16 by about 25mm or 1 inch long.* A dowel pin would work perfect. If not you could get by with drill rod. Remember there is a ball bearing inside the clutch pin, so make sure you didn't loose it also.* John
Reply With Quote