View Single Post
Old 04-05-2009, 09:03 PM
Large Filipino Large Filipino is offline
Motorized Bicycle Elite Member
Join Date: Jul 2008
Location: Northglenn,Colorado
Posts: 656
Default Re: New to Forum and need clutch help

It's just me but I had my clutch cable break twice at the lever before I took a look at the
stock design. I noticed there's a kink from the cable mount to the clutch arm later designing that
roller. It made a difference in clutch pull by 1/3 and no snapped cables.
Later on I eliminated the cable mount from the engine entirely. I even retained the same cable when I transferred it over to MOOP2
Here's that pic with ads removed. It's the same setup on MOOP2. I used a derailier clamp to keep the cable on the frame. On this pic I used the mount the front derailier cable usually goes when it's just a bike.
Attached Images
File Type: jpg Mod.jpg (71.5 KB, 61 views)
You have found the fountain of youth. Ride and forever stay young.

Last edited by Large Filipino; 04-05-2009 at 09:07 PM.
Reply With Quote