Re: Bike maintenance
Your going to love your hub/sprocket adapter!
Since your going to have the chain off, I would mark it so it gets installed just like it was removed.
Once marked, and you have the chain off, I would soak it gasoline for a few minutes, and use a brush to clean off accumulated debris. Hang it up, and let it drip dry. Once installed,I use a spray on chain lube made for motorcycles, that is real sticky when it dries. This is superior for lubricating as oil will simply fling off at speed.
Under the clutch cover I would use a very small dab of heavy grease between the gears, as wd40 is too thin. Small amount of grease between the gears. Don't over do it!