View Single Post
Old 11-06-2015, 06:40 PM
jgd1127 jgd1127 is offline
Motorized Bicycle Member
Join Date: Oct 2015
Location: dillsburg
Posts: 28
Default new motor will not start at all

Well I finally got finished putting the motor kit on my bike and hooked it all up fuel lines cdi spark plug it has spark and compression the readings for the cdi dont seem to match the readings on here that I found im getting 40 -50 on blue and black wire and also on the spark plug wire and blue wire also 40 to 50 but I am getting a good spark dont know if the cdi can be bad and still get a good spark I dont see how that would work it has compression if I push it with clutch out I can hear it pumping and it has resistance against me pushing it with the plug in it seems to be getting fuel but I dont know how to tell if it is getting enough In the cylinder head or not I know the carb has fuel in it I took the drain screw out I the bottom of carb and a bunch of fuel poured out so I have no clue what else to do please help me with all options please thank you very much
Reply With Quote