View Single Post
Old 02-10-2009, 09:19 PM
trackfodder trackfodder is offline
Motorized Bicycle Elite Member
Join Date: Sep 2008
Posts: 334
Default Re: shwinn stingray 80cc wiring

If we are talking about a Gru Bee ,the white wire is the killbutton/lighting supply. (Shh- It isn't really an 80cc) If Stingray means a fork that has a 20" wheel but could accommodate a 26, you might be interested in putting a caliper brake on as I did. I machined a couple grooves to fit the fork struts in a piece of magnesium and another for the front of the fork. I clamped the 2 together and mounted a caliper on the backside. The mount can be done differently to escape having to machine it. Steel could be bent to fit the struts. I just had lots of mag and it's fun to machine and cut. A tab mounted could hold a fender. In my case, I still need to cut a crescent from the plate to fit the fender contour.

Last edited by trackfodder; 02-10-2009 at 09:34 PM.
Reply With Quote