Maybe I ought to add one word of caution:
You can not
mount the cable out at the end of the choke lever. Out there where you find the little 'nubs' for your fingers.
The reason for this is that your shifter does not have enough 'throw' to get that choke fully closed. Or fully open, if you adjust things from the other end.
The cable must be mounted closer to the fulcrum. So this means that you need to fab up a little tab that you'll attach to the choke lever. Giving you a decent spot, closer to the axis to attach the cable.
But that's not hard. Mine only cost 25 cents.