View Single Post
Old 02-05-2009, 09:30 AM
Ghost0's Avatar
Ghost0 Ghost0 is offline
Motorized Bicycle Elite Member
Join Date: Mar 2008
Location: Bellingham, WA
Posts: 764
Default Re: **important Questions**

I too had used the stock set up and never had a problem. Here are two tips above what had been mentioned. Your chain stay is typically not parallel to the chain. This would suggest that you need to twist the roller so it runs in line with the chain and not sideways. The other tip is to have the chain run on the bottom instead of the top side of the roller. That way if it slips it will slip to the outside of the bike and not into your spokes.
Design is easy, execution the hard part.
Reply With Quote