View Single Post
Old 10-22-2014, 03:21 PM
KCvale KCvale is offline
Motorized Bicycle Elite Member
Join Date: Feb 2010
Location: Phoenix,AZ
Posts: 3,547
Default Re: KC's 68cc 4-stroke 4-speed soft tail

Cole did a good job using some old kick-stand stock to widen the kick-start lever and it fired right up.

Note that the stock MotoPed throttle does NOT have enough actual inner cable and you can't adjust the outer sheath so on this carb it fires at 1/2 throttle.

The stock throttle also doesn't have a kill button so I put a 66cc throttle with kill button and the cable that was still too short so we cut ~1/3" off the throttle barrel at the stop and got it go, and man does it go, 'scary go fast' go.

Originally Posted by runnermike View Post would be cool if you could post of video of this thing in action!
I (well Cole) broke the mode selector off my Cannon camera so no video for now, it's stuck in HQ still node but that works just dandy for my needs.

I'll post pics on all my mods to make it go later but you need to make a few using the $300 engine I used.
KC's Krusiers Builds

Last edited by KCvale; 10-22-2014 at 03:24 PM.
Reply With Quote