View Single Post
Old 10-15-2014, 12:25 AM
Tom in Kingman's Avatar
Tom in Kingman Tom in Kingman is offline
Motorized Bicycle Member
Join Date: Aug 2010
Location: Kingman AZ
Posts: 34
Default Re: Need some modification help

Originally Posted by mapbike View Post
the extention on amazon is made so that one end of it goes down inside the forks stem tube and then your excisting stem will go inside the upper portion of the extention, if you look closely at the pic you'll notice the extention has a larger diameter on the upper end, that is so your stem will fit inside it.

Thank you BIG TIME! The picture wasn't clear but your explanation IS! I measured the opening in the frame and it measures .875. The shaft that holds my handlebars is .825. So there is a bit of a "wobble when it is inserted. So, should I order the smaller one or the larger? (21.1 or 22.2).
Tom in Kingman AZ

Last edited by Tom in Kingman; 10-15-2014 at 12:27 AM.
Reply With Quote