Your very welcome. If I can be of any further help let me know. Oh and you don't need to hang the tank as I did or move the down spout. The method can be used to a stock tank sitting on top of the rack. The reason I made those mods is because I'm adding saddle bags and a control box to the bike with full 12 volt lights and electronics. But for less than $3 cost it worked out very well. Ive ridden the bike a lot refilled the tank three times and still not a single drop leaked. Oh I did however change all the rack hardware to stainless steel hex socket bolts and nylon lock nuts. 5mm with washers, the stock hardware was really poor.
Have fun, be safe!