View Single Post
Old 07-25-2014, 03:35 PM
Nghtrider62 Nghtrider62 is offline
Motorized Bicycle Elite Member
Join Date: Jul 2014
Location: Northern California, USA
Posts: 100
Default Re: Need a lil help here

2 1/4 turns on the idle screw inward, also the float bowl screw at the bottom of the carb was loose. Saw a small puddle of gas under the carb which made me look why in the first place.
Cleaned the back rim off from the cast away Liquid wrench Improved Chain and cable lube I sprayed on the chain before going anywhere, and the lower rear bar with the chain tightener is on. Checked chain tension, and re-checked all bolts and screws for looseness
All Good to go. Thank you 2Door for the thoughts. They've Helped.
Reply With Quote