View Single Post
Old 05-15-2014, 12:01 AM
greaser_monkey_87 greaser_monkey_87 is offline
Join Date: Mar 2014
Location: USA
Posts: 397
Default Re: coaster brake revisisted

It is nice work, and it does look very clean and well designed, but you can also bend the stock brake arm to fit the sprocket. I did it to mine without even taking the arm off the wheel. Just make sure your cone and locknut are properly tightened and use a seatpost, slide it as far down as you can get it on the arm and bend it out. Then reposition the seatpost a little higher up on the brake arm and bend it in. It worked for me on my manic sprocket adapter.
Reply With Quote