View Single Post
Old 05-11-2014, 06:15 AM
Heretic's Avatar
Heretic Heretic is offline
Motorized Bicycle Senior Member
Join Date: Mar 2013
Location: burlington vt
Posts: 99
Default Re: Electrolytic Etching

I used the backing from a sheet of labels. Just pealed off all the labels and printed on the silicone coated paper. Ink came right off. No problems with the paper sticking. And the ink transfers at about 170 deg. so if you have a multi-meter with a temp probe use it to be sure you hit the mark.
Heretic AKA Capt. Over-engineer
Reply With Quote