View Single Post
Old 04-09-2014, 05:53 PM
Greg58's Avatar
Greg58 Greg58 is offline
Motorized Bicycle Elite Member
Join Date: May 2011
Location: Newnan,Georgia U.S.A.
Posts: 2,620
Default Re: Resistance while clutch is pulled

Try removing the right side engine cover so you can see the friction plate, pulling the clutch lever you should see movement in and out. It will also show the flower but that was mensioned above. If you used the large spring as a clutch return spring at the clutch arm it may feel like the clutch is adjusted but what you feel is only the spring compressing. I use only the small spring between the cable standoff and the clutch arm to keep the cable from coming out of the arm.
Your results may not be the same,Greg
Reply With Quote