View Single Post
Old 03-10-2014, 01:46 AM
Lachiepower0402 Lachiepower0402 is offline
Motorized Bicycle Elite Member
Join Date: Mar 2014
Location: Eastwood
Posts: 111
Default Re: Got problems, please help!!

So I got a piece of threaded rod today the same width as the original studs, I cut it up to the exact length of the studs 2 large and 2 small, just to be sure does the long go at the back and the short at the front.

Also with both the front and one back I put bolts that had a larger width and jammed them in, the front ones are still holding but the back has stripped the inside and the front will soon follow. To put the original widths back in the holes what should i use: epoxy, red loctite, blue loctite or something else

NOTE: I think the larger ones were about 1mm to 2mm bigger and may have a different thread
Reply With Quote