Re: Got problems, please help!!
Now because of the design of the frame the chain tensioner won't correctly align to the cog and we need to correct this
Simply take off the freewheel on the tensioner whilst it is attached to the bike ,place a tool or bar into the slot where the freewheel attaches to the tensioner and give it a twist towards the rear cog , then place the freewheel on but don't bolt it on ,check by eye if it is aligned with the rear cog and if not continue to twist until the freewheel is aligned
From the pic in this post you should have an idea of how this is done
If you still can't work it out let me know and I'll do a small tutorial video and post it to YouTube
Light travels faster than sound ,ergo some may appear smart until you hear them speak