Originally Posted by akohtz
You know what. You're absolutely right. If there is going to be a failure ... those small bolts holding the ring together will be the point.
I'm thinking I'll either use some loctite or I'll replace the two small bolts with longer ones with a nylock nut on the end to hold them in place.
I really really like the stopping power in this front brake, but I want to use it with total confidence.
Thanks for the feedback.
You're very welcome, longer bolts/screws and nyloc nuts with a dab of loctite would sure be some extra insurance, by the way I like your bike all the way around, you did an excellent job on it, very clean build.