View Single Post
Old 08-26-2013, 12:23 AM
mrfubs's Avatar
mrfubs mrfubs is offline
Motorized Bicycle Elite Member
Join Date: Jun 2013
Location: michigan
Posts: 294
Default Re: How much did your build cost?

If i where to sell my bike it would leave my house for 900$ I balanced the crank did extensive and necessary porting also added a 3rd transfer port.

Kent La Jolla
cruiser bike

- 3rd transfer port
- Notched/windowed/ramped piston
- Drilled 4 oil holes for main bearings
- 2003 yz 80 expansion chamber
- milled cylinder .20 thou

- 74cc Puch hi comp head (vintage)
- Arrow's reed block kit
- NGK plug
- RST Suspension fork
- disc brake front wheel with 203mm rotor
- Avid elixir 3 dual piston Hydraulic front brakes
- 36t Sprocket
- CNS carb re jetted
- High quality SKF main bearings



Bike will cruise in the power band at 45mph. Will take decent size hills with ease. You can run this bike for miles at a time basically if it has gas it will keep on trucking.

The power band is awesome when it kicks in.

All said and done about $572 and a LOT of time.
- - - - - - - - - - - - - - -
When in doubt Throttle out!

Last edited by mrfubs; 08-26-2013 at 12:44 AM.
Reply With Quote