View Single Post
Old 08-07-2013, 10:42 AM
mew905's Avatar
mew905 mew905 is offline
Motorized Bicycle Elite Member
Join Date: Sep 2012
Location: Moose Jaw
Posts: 647
Default Re: Chinese motor re ring kits or parts

all 66cc rings are the same so you dont have to worry about that, however cylinders and ESPECIALLY pistons are best bought from the vendor you bought it from.

Wrong piston:
There are at least 2 different kinds of 66cc motors out there in production right now, nearly identical, but one has a 5mm shorter rod arm than the other, so the wrist pin is in a different location and could either end up hitting the head (which is correctable using gratuitous amounts of base gaskets) or hitting the crank (unfixable, the maximum you can cut off the bottom of the piston is 2mm before you uncover the exhaust port, and to clear the crank you'd need at least 3-5mm)

Wrong cylinder:
Not nearly as catastrophic as the wrong piston, the worst that will happen here is your ports are all wrong, and you lose power. A dremel *could* fix this depending on how bad it is.
Skyhawk GT-5, Dax RT, RSE Reeds, Jag CDI, Drilled stock exhaust, Puch Hi.
List of HT hardware === Stop four-stroking!
Reply With Quote