Re: No spring back in throttle
Did u fix ur throttle problem? i had the same problem where after everything was screwed back into the carb i woukd twist the throttle and it would not go back to normal. Soo what i did was open the throttle cable where it connects to the carb n took out the barrel and did the same thing, twist the throttle to see how it would act. that part was fine so it had to be the hole it was sitting in that i didnt mount it propperly. so i looked at the small barrel for the throttle where the pin n spring is at n on the side of the barrel there is a notch for where the idling screw would be touching. i just lined that up, rescrewed on the cap and that fixed my problem wit the throttle going back to place.