Re: new to forum
I will try that maniac, thanks. I am at a stopping point with this bike until my hub gets fixed and rear wheel get re-laced. I am going to re look at my mountain bike the clearance issue is with the carb, it hits the top bar. I am going to the hardware store today and see if I can find a piece of aluminum tubing that I can connect and have it come out the side of the frame. I have the carb and intake tube off so I can match it up. I will run a search and see if I can find anything. I'm sure this has been done before. If the motor has been stuffed inside a bmx bike then this had to have been done.