stock exhaust stinger

hollywood528

hollywood528

New Member
UPDATED: NEW PICS A FEW POSTS DOWN
Little stinger I welded on to the stock exhaust.
I believe it helped quiet it down a little now that its not headed towards the ground.
I was thinking about changing the header length and path to run across the side of the bike.
Anyone else done some similar mods..
1zgyn1l.jpg

21nk686.jpg
 
Last edited:
I did something similar with a early version of The Pig except I ran it all the way back to the rear. Much quieter!
 
hollywood528 said:
Thats what I was thinking about doing too. Do you have any pics of your setup?
Click to expand...

I did a couple different versions...
This one has a cone shaped rear section and was made by cutting a chunk out of a table leg. The pipe was too thin and had a tinny sound.


This one was all conduit from the kit muffler back and sounded much better, more like a small motorcycle.

 
Cool. Thanks for sharing those pics. Thats similar to what I'm shooting for, with the exhaust running out the back. My main goal is to make it as quiet as possible.
I was surprised what my little stinger did to suppress noise... I can imagine the longer one like yours helped out a lot
 
You can also add another small muffler in back for better quieting. I've used a small briggs tube style with good results. Sorry, no pics of that one. Sold the pipe right after the install, lol!
 
Thanks for the inspiration. Here's what I came up with...
A little longer.. I'll report back with how it performs when I ride home tonight....
UPDATE: wow! Super quiet! Kinda sounds like a little old moped now. Now I really only hear the motor clanking away.
I've already put sound dampening on the covers and some rubber in between the fins.. any other thoughts on quieting it down
23k87r.jpg

2uoo2dy.jpg
 
Last edited:
I cut up a jandel to help with keeping the intake noise down. I think it needed to be a bit bigger to be effective.
17062011278.jpg


I have also use the sick bike parts muffler tip to help with the 2 stroke rasp.
20130305_073648_zps1e213f42.jpg
 
just solder. and the blow torch. plus a soldering iron to help the solder flow.

the blow torch, is a bit to hot sometimes. even from heating it from the inside.
 
You must log in or register to reply here.
Back
Top