Re: Seat post stuck
Originally Posted by glennbo
i once had this problem someone pounded the wrong size seat post in with a sledge hammer it was so tight it split the down tube the way i got it out was i used a 1 inch hole saw and cut a hole in the bottom bracket got a long piece of 5/8 bar and beat the sob right back out! brazed the split in the tube and the round plug back in the bottom bracket. its a little extreem but the frame was an old schwinn so i wanted to save it!!
Great idea if nothing else works. Looks to me like the bike is worth saving too.
If more is better, then too much is just enough.
If you can't afford it, build it yourself.