View Single Post
Old 11-26-2008, 01:52 AM
sojudave sojudave is offline
Motorized Bicycle Elite Member
Join Date: Oct 2008
Location: austin tx
Posts: 189
Default re: Motorized Bicycle Take a Tip...Leave a Tip

Here's my tip. When I put the engine in my frame, the carb wouldn't fit with the stock intake manifold. So I cut the original manifold and mounted the carb. It still barely fit but the airfilter wouldn't and I had an air leak. I bought a second manifold from and cut the flange off. Then I took a piece of rubber hose, two hose clamps and used it to connect the two cut up manifolds. Because the manifold I bought from Dax still had a bend in it, I was able to turn it so that it stuck out of the side of the frame. Now everything fits and there's no air leak. Here's a pic:

Reply With Quote